EMERGENCY LAMP · FAST CHARGE
Rechargeable emergency bulb with fast charging and full battery management on our self-developed platform. Grid power lights the room and charges the pack; a cutover switches to battery instantly — supplied as CKD kits for local assembly.
| Parameter | Specification |
|---|---|
| Charging | Fast charge, automatic cutover to battery on grid loss |
| Input voltage | 90 – 440 Vac |
| Surge capability | 4 kV |
| Efficiency @ 230 Vac | > 87 % |
| Power factor | > 0.97 @ 230 Vac, 10 W output |
| Overcharge protection | 4.2 V typical |
| Over-discharge protection | 2.4 V typical |
| Max emergency drive current | 1 A |
| Driver platform | Self-developed, battery management integrated |
| Supply model | CKD kits / finished lamps |
Answers use the same platform data as the specification table above. Where a number has not been measured for this exact wattage, we say so instead of quoting a round figure.
Run time is set by the battery pack against a maximum emergency drive current of 1 A, so it depends on which pack you specify rather than on the lamp alone. Tell us the run time your code requires and we will size the pack to match it.
We do not quote a headline number for this, because a run time without a stated load and battery capacity is not a specification — it is a guess dressed up as one.
The charging circuit is designed for short daily grid windows, so a brief period of mains power is enough to keep the pack ready. That suits markets where the supply is intermittent rather than off for a full day.
Recharge time depends on pack capacity and on how deeply it was discharged, so confirm it against your duty cycle before quoting a figure to a customer.
Yes, when specified — “battery pack included in kit” is an option on this model. Many buyers choose to ship the lamp and the pack separately, which is cheaper on air freight and avoids dangerous-goods handling on the lamp itself.
Overcharge protection cuts in at about 4.2 V and over-discharge at about 2.4 V. Both matter more than capacity in this product category: most emergency lamps fail early because the pack was left discharged, not because it was too small.
Over-discharge protection is the one to ask about when you compare suppliers — it is often left out to save a few cents.
The input stage charges correctly from 90 to 440 Vac, which covers sagging feeders and night-time overvoltage without damaging the charging circuit. Surge immunity is 4 kV line-to-line, consistent with the rest of the platform.
Efficiency is above 87 % at 230 Vac input, so very little of the charging energy is lost as heat in a closed fitting.
Battery packs are regulated for air transport, so most customers ship lamps and packs separately and consolidate at destination. Tell us the destination and the mode and we will confirm which documents we can provide for that route.
Do not assume a supplier’s generic certificate covers your lane — dangerous-goods rules differ by carrier and by route.

High-power T-bulb series, PF 0.988, >105 lm/W, low EMI.
View Details
Surface-mount tube batten, high-integration driver, 90–440 Vac.
View Details
Knocked-down export: lower duty, local certification, one-day assembly training.
How It Works